Today, we’re going to discuss commercial aluminum door repair. Due to heavy use, aluminum doors are highly susceptible to wear and tear. By identifying and addressing these issues early, you can save a significant amount of money and avoid the need for a new door installation, which may put a strain on your budget.
Here are some common problems you might encounter, along with solutions to fix them. Keep an eye on these to avoid costly repairs.
1- Commercial Aluminum Door Repair: Misalignment
Misaligned aluminum doors are a common issue, often caused by problems with the hinges. Over time, hinges can become loose, corroded, or misaligned, making it difficult to open or close the door properly.
Solution: How to Fix a Misaligned Aluminum Door
• Tighten Loose Screws: Check and tighten any loose screws on the hinges.
• Address Rust or Damage: If the hinges are rusty or damaged, clean them thoroughly. If the problem persists, consider contacting a commercial aluminum door repair company – like Esna Glass- to replace the hinges if necessary.
2- Closing Issues on Commercial Aluminum Doors: Causes and Solutions
A common problem with commercial aluminum doors is difficulty in closing, slamming shut, or failing to latch properly. This can compromise the security and safety of your business.
What Causes These Issues?
The most common causes include wear and tear, misalignment, fluid leaks, electrical issues, or worn-out components within the door closer.
How to Fix It?
You can effectively address these issues by lubricating, troubleshooting, or replacing the damaged parts.
3- Commercial Aluminum Entry Door Repair: Automatic Doors (Sensor Issues)
Automatic doors provide hands-free access by responding to movement or presence within a designated area. However, they can encounter several issues that affect their functionality.
Common Issues
Problems with automatic doors often stem from damage, outdated sensors, dirt, misalignment, or electrical malfunctions such as faulty wiring, power surges, and control board issues. These factors can lead to sensor malfunctions.
How to Fix It?
To troubleshoot these issues, start by checking the alignment and addressing any visible damage. Next, verify the power supply and sensitivity settings. If necessary, recalibrate the sensors or perform software updates to restore proper function.
4- Damaged Weatherstripping
Damaged weatherstripping is a frequent issue in aluminum door repairs. Weatherstripping is crucial for maintaining energy efficiency and protecting commercial aluminum doors and windows from the elements. When damaged, it can lead to drafts, air leaks, and water infiltration.
Common Issues
Weatherstripping deterioration is typically caused by wear and tear, leading to compromised seals around doors and windows, which in turn reduces energy efficiency and increases exposure to the elements.
How to Fix It?
Inspect the seals and weatherstripping thoroughly for signs of damage. If any issues are found, contact a commercial aluminum door repair service to replace and install new weatherstripping to restore energy efficiency and weather resistance.
Common Issues with Commercial Aluminum Storefront Doors and How to Fix Them
1- Misalignment
- Issue: Doors may become misaligned, causing difficulty in closing or gaps that let in air.
- Fix: Adjust the hinges or the door closer. If the frame is warped, realign or replace it.
2- Door Closer Malfunction
- Issue: The door slams shut or doesn't close fully.
- Fix: Adjust the tension or replace the closer if it's worn out.
3- Weatherstripping Wear
- Issue: Worn or damaged weatherstripping allows drafts and moisture.
- Fix: Replace the weatherstripping to restore a proper seal.
4- Glass Damage
- Issue: Cracked or broken glass reduces security and energy efficiency.
- Fix: Replace the glass panel with a matching type for safety and appearance.
5- Lock Problems
- Issue: Locks become difficult to engage or disengage.
- Fix: Lubricate the lock mechanism or replace the lock if it's faulty.
6- Corrosion or Discoloration
- Issue: Aluminum frames can corrode or discolor over time, especially in harsh environments.
- Fix: Clean regularly, apply a protective coating, or replace corroded parts.
When installing Commercial Aluminum Door?
Severe impact can damage our commercial aluminum doors beyond repair, including accidental collisions, excessive wear from high traffic, or exposure to harsh environmental conditions leading to significant corrosion.
Other causes might include improper maintenance, such as neglecting regular cleaning and inspections, or faulty installation that results in structural weaknesses.
In these cases, replacing the door may be necessary to ensure security, functionality, and aesthetics.
Final words
Seeking a company that offer aluminum door repair Mississauga or aluminum door repair Milton? Look no further. Call us right now— we offer a 24/7 service and will be at your location within 30 minutes of your call.
And our last piece of advice: Don’t wait for problems to escalate. Act now to save significant money extend the life of your doors.
